We are responsive company based on principle of uncompromising commitment to excellence in our 2507 Super Duplex Round Bar products and services. We have good source for stockists and manufacturer 2507 Super Duplex Round Bar. We extend a qualitative range of 2507 Super Duplex Round Bar to our clients that is manufacturer in compliance with set industry standards.

ASTM A276 Super Duplex 2507 Round Bar Specification

Grade	Super Duplex 2507 – UNS S32760
Specification	ASTM A276 UNS S32760,2507 Super Duplex Stainless Steel
Standard	ASTM, EN, JIS, ASME DIN, AISI, API, BS Round Bars
Length	3 to 6 meter, Custom Cut Lengths
Super Duplex 2507 Round bars size	Diameter: 3mm - 450mm DIA
Super Duplex 2507 Flat bar size	Thickness: 2mm~100mm
Width: 10mm~500mm
Super Duplex 2507 Square bar size	4mm4mm~100mm100mm
Super Duplex 2507 Angle bar size	3mm* 20mm* 20mm~12mm* 100mm* 100mm
Super Duplex 2507 Hex Bar size	2mm~100mm
Super Duplex 2507 Rectangles Size	33mm x 30mm to 295mm x 1066mm
Super Duplex 2507 Billet Size	1/2" to 495mm Diameter
Finish	Grinding, Turned, Black, Rough Polish, NO.4 Finish, Centreless Ground, Bright Polished,Matt Finish & BA Finish
Tolerance	H13K9, K10, K11, K12, H12, H10, H8, H11, H9 or as per clients’ requirements
Surface	Hot Rolled Pickled or Sand Blasting Finished Peel turned (PT) Bright Peel turned and burnished (PTB) Rough machined (RM) Cold Drawn Hairline Polished
Condition	Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar, Sheared & Edged, Rolled Flat
Technique	Super Duplex 2507 Cold Rolled, Hot Rolled, Forged Round Bar, Cold Drawn, Rod
Form	Half Round,Round, Hex (A/F), Triangle, Rectangle, Rod, Precision Ground Bar, Square, Profiles, Forging, Round Rod, Hollow, Rings, Blocks, Billet, Ingot, Threaded, T-Bar, Half Round Bar, Flat Bar, Channel Bar, I/H Bar, Angle Etc.
Manufacturing Process	Surface finish 0.5 µmm to 1.5µmm max Peeled Bars: Dia. Ø15 mm -120 mm. Peeled, Straightened, Centreless Ground & Polished. Straightness upto 0.5mm/ mtr to 1mm /mtr. 240,400,600 Grit Belt Pol Cold Drawn Bright Bar: Dia. 2.5 mm to 14 mm. Annealed, Pickled, Cold Drawn, Centreless Ground & Polished.
Heat Treatment	Solution Annealing, Soft Annealing, Hardening & Tempering & Normalizing, Oil & Water Quenching.
Quality & Inspection	Bundles are made of 500/1000kgs each packed in HDPE sheets. We issue EN10204/3.1 Certificate as per ADW0 Free from any internal defects All required Mechanical and metallurgical tests are carried out at our works. Each lot is tested and ensured that material is free from Radio active contamination. Each Bar is tested for size tolerance,Ovality,length and Roughness. Container is fumigated before stuffing. All wooden box /blockes are also fumigated.
Features	Chemical resistance Dimensional accuracy Durable High strength Corrosion resistance
Tolerances	according to EN 10278 - ISO 286-2
Our Super Duplex 2507 round bar stockyad in India	Hyderabad, Bhubaneswar, Ahmedabad, Coimbatore, Tiruchirappalli, Tirunelveli, Thiruvananthapuram, Chennai, Noida, Shivamogga, Dhanbad, Pune, Agra, Mumbai, Bengaluru, Gujarat, Navi Mumbai, Pimpri-Chinchwad,
Certificates	EN 10204 / 3.1
Our Super Duplex 2507 round bar conforms to NACE MR0175/ISO 15156

Super Duplex Steel 2507 Hollow Bar Finishes and dimensions

2507 hollow bar is produced to arrange in hot finished condition within the size range OD 32 - 275 mm, ID as required. Dimensions are given as outside and inside diameter with ensured component sizes after machining.